Truck & trailer pallet calculator

Pick a trailer and a pallet. You get how many pallets fit straight, turned and mixed, how much floor they take (linear feet or loading metres) and whether the weight limit is reached first.

Trailer

Loading clearance

Total free space we leave so pallets can actually be loaded. Our default (50 mm / 25 mm, about 2 in / 1 in) — not an industry standard; set 0 to see the zero-gap fit.

Units
Pallet

Need the pallet first? Stack cartons on a pallet →

Pick a trailer and pallet, then press Calculate.

Defaults: 53 ft dry van, 48×40 in pallets, 60 in loaded height.

For planning only. Verify container dimensions, weights and loading safety before shipping. Trailer sizes vary by manufacturer and year — edit the dimensions to match your equipment.

How the numbers are worked out

Straight means every pallet’s long side runs along the trailer; turned means every pallet’s short side does. Both are simple rows: pallets across × rows along the trailer. Mixed lets our load planner combine both directions (sometimes called pinwheeling) and can fit a few more. We show all three and highlight the best.

Linear feet (US): we report the trailer length the pallets actually occupy in the plan, and next to it the common carrier estimate — pallets loaded two across, so each row of two uses one pallet length. Carriers apply their own rules, so check their tariff.

Loading metres, LDM (Europe): we report the trailer length actually occupied, and the standard formula length × width ÷ 2.4 per pallet (a euro pallet is 0.4 LDM). Double stacking doesn’t change the formula; whether it reduces the charged LDM depends on the carrier.

Default trailer sizes and payloads come from published specifications or rental fleet data, or are common values where no official figure exists — each preset says which. See the methodology.